Featured Downloads
A collection of downloads; from our most popular ISIS cube files to 3D Models, Map sets, posters, and more by the LROC Team.
![]() |
WAC Hapke 7-Band Mosaic: LROC WAC normalized (incidence=60˚, emission=0˚, phase=60˚) reflectance global color mosaic (Version 1.0) using Hapke photometric function as seen in Sato et al. (2014) , Resolved Hapke parameter maps of the Moon, J. Geophys. Res. Planets, 119, 1775-1805, doi:10.1002/2013JE004580 |
|
![]() |
WAC Empirical 7-Band Mosaic: LROC WAC normalized (incidence=30˚, emision=0˚, phase=30˚) reflectance global color mosaic using an emperically derived photometric function similar to that of Boyd et al., 2012 2795.pdf |
|
![]() |
WAC Empirical 643 nm Mosaic: LROC WAC 643nm normalized (incidence=30˚, emission=0˚, phase=30˚) reflectance global mosaic using an empirically derived photometric function similar to that of Boyd et al., 2012 2795.pdf |
|
![]() |
NAC North Pole: LROC North Pole NAC mosaic. NAC images were map projected onto the GLD100 DEM using the LOLA crossover corrected ephemeris. The images were not registered to one another. |
|
![]() |
NAC South Pole: LROC South Pole NAC mosaic. NAC images were map projected onto the GLD100 DEM using the LOLA crossover corrected ephemeris. The images were not registered to one another. |
|
![]() |
WAC GLD 100 Topography: WAC GLD100 with LOLA 30m DTM poleward of 75˚ latitude. |
|
![]() |
WAC Global Morphologic Mosaic: Global WAC 643 nm mosaic of images between November 2009 and February 2011. |
|
![]() |
WAC Farside Dusk Mosaic: Farside WAC 643 nm mosaic of images acquired between July 2010 and July 2012. |
|
![]() |
WAC Nearside Dawn Mosaic: Nearside WAC 643 nm mosaic of images acquired between December 2010 and December 2011. |
![]() |
Apollo Landing Site 1:100,000 Model Set: 3D-printable models of all six Apollo sites at the same scale, with a display card showing the traverse routes. |
|
![]() |
King Crater: 3D-printable model of King crater. |
|
![]() |
Larmor Q Crater: 3D-printable model of Larmor Q crater. |
|
![]() |
Lichtenberg Crater: 3D-printable model of Lichtenberg Crater. |
|
![]() |
Lowell Crater: 3D-printable model of an unnamed crater on the rim of Lowell crater. |
|
![]() |
Messier Crater: 3D-printable model of Messier crater. |
|
![]() |
Shackleton Crater: 3D-printable model of Shackleton crater. |
|
![]() |
Sosigenes Graben: 3D-printable model of an Irregular Mare Patch in Sosigenes graben. |
|
![]() |
Tall Mountain: 3D-printable model of an unnamed tall mountain near the rim of South Pole-Aitken basin. |
|
![]() |
Vallis Schoteri: 3D-printable model of a section of Vallis Schroteri. |
|
![]() |
Shackleton Crater Puzzle: 3D-printable 4-piece puzzle of Shackleton crater. This puzzle has much looser tolerances than the others on this page, and is a good place to start if you want to 3D print our lunar landscape jigsaw puzzles. |
|
![]() |
Larmor Q Puzzle: 3D-printable 30-piece puzzle of Larmor Q crater. This is an extremely challenging 3D print, and requires that your printer and slicer be perfectly calibrated. Read the included readme file before attempting this print. |
|
![]() |
Mozart W Puzzle: 3D-printable 28-piece puzzle of the Mozart W volcanic vent. This is an extremely challenging 3D print, and requires that your printer and slicer be perfectly calibrated. Read the included readme file before attempting this print. |